Business Card Holder


	Business Card Holders

		Classy personalized Business Card Holders

Part #	Description	Size	Case Qty	Each	Case
SBCH-SS	Polished stainless steel with sublimatable insert. Size 3 ¾” x 2 ¼” x 5/16”. Insert size 3 3/16 x 1 11/16”/	3 ¾” x 2 ¼”	8	6.30	5.35

Part #	Description	Size	Case Qty	Each	Case
SBCH-AL	Brushed aluminum business card holder. Size 3 ¾” x 2 ½” x 5/16”	3 ¾” x 2 ½”	8	5.35	4.95

Part #	Description	Size	Case Qty	Each	Case
UNI5751	Business Card Holder with Al insert designed for desk topMahogany color Base with Unisub Metal insert and an inner area for business cards	2 x 3.5”	10	4.57	4.45

Part #	Description	Size	Case Qty	Each	Case
UNI5752	Unisub™ Mahogany Wooden Desk Set with Business Card Slot, 2" Tall, 2.5" Wide, includes a 1.65"x 9.625"x .030" aluminum insert, two holes for pens/pencils, and a slot for business cards. Card slot holds to fifty 2" x 3.5" business cards.	2” x 2 1/2” x 9 1/2”	10	8.01	7.79

Transfer Instructions for Metals:

* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image”
* Place a sheet of plain white paper on the press.
* Remove the protective plastic covering from the product.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
* Cover imprintable with a smooth absorbant paper towel
* Press at 400 degrees F for 60-70 seconds using Medium pressure
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface
- You can also try pressing the metal from the back side

Note: These instructions are guide lines only and are based on the inks, paper, and products we supply. Your inks, papers, etc. may require adjustments in your time/temp settings.


	Also Check Out...



		pencil holder




		pencil case




	neck tie




		key chain


	Whether you’re just starting out or already a pro Image Creations is here to support you with the latest in image transfer technology!


		Image Creations Inc. is not responsible for typographical or photographical errors. Prices and specifications are subject to change without notice. All pricing is reflected in Canadian Funds.