Canister

Porcelain Canisters/Candy Jars


	Porcelain Candy Jar with Cork Lid - This porcelain candy jar measures 3 3/4" tall, 3 1/4" in diameter and can be decorated using your mug press. The candy jar is made of our specially formulated bright white porcelain -- so your image will really "pop" when the jar is decorated. Each jar comes with a cork lid.

Part #	Description	Size	Case Qty	Each	Case
SCJC	Porcelain Candy Jar with Cork Lid	3 3/4” x 3 1/4”	12	6.20	5.50


	Porcelain Candy Jar with Porcelain Lid - This porcelain candy jar measures 3 3/4" tall, 3 3/8" in diameter and can be decorated using your mug press. The candy jar is made of bright white porcelain. Each jar comes with a flat porcelain lid with a ball handle (the lid cannot be decorated).

Part #	Description	Size	Case Qty	Each	Case
SCJP	Porcelain Candy Jar with Porcelain Lid	3 3/4” x 3 3/8”	12	5.45	4.90


	Porcelain Jar / Canister with Wooden Cover - This porcelain jar measures 5 3/4" tall, 3 3/4" in diameter and can be decorated using your mug press. The candy jar is made of our specially formulated bright white porcelain -- so your image will really "pop" when the jar is decorated. Each jar comes with a wooden cover. Dishwasher safe. .

Part #	Description	Size	Case Qty	Each	Case
SPJW	Porcelain Jar with Wooden Cover	5 3/4” x 3 3/4”	24	8.25	7.80

PRESSING CANISTER IN A MUG PRESS
* Size and print mirrored image to match size of canister being pressed.
* Using thermal heat resistant tape, tape transfer face down on canister.
* Wrap canister and transfer with either a plain piece of paper or piece of Teflon.
* Pressing on the Mug King Press –Set 2120 F - Temp 3600 F –Time 12 sec. Other Presses
without an idle press at 400 degrees for 5-6 minutes using heavy pressure.
* Remove canister from press. Immerse dispenser in room temperature water and allow to cool.
When completely cool, remove from water and dry with a soft cloth.
* Pressing times may vary slightly. Adjust according to your own press.

PRESSING CANISTER USING A MUG WRAP
* Pre heat oven to 400 degrees. While oven is preheating, prepare canister, images, and wraps
* Tape transfer to the canister using heat tape.
* Place a piece of plain paper down on the inside of the wrap (to soak up the extra sublimation)
* Place the wrap around the tea pot. Engage
   catch block with catch bar. Align wrap to be even with the top and bottom.
* Place up-side down on center rack of oven. Allow air space between tea pot and oven walls
   of 2". canisters should be evenly spaced and not touching.
* Bake for 15 minutes. Baking times will vary depending on oven and number of canisters being
   baked. It is recommended that getting a monitor to check the temperature in the oven.
* While canisters are baking, fill container with room temperature water. Water should be deep
   enough to fully submerge tea pots.
* Using oven mitt, carefully remove wrapped canisters from oven and immediately remove wrap
   and transfer.
* Immerse canister in water and allow to cool. When completely cool, remove from water.


	Also check Out...




		soap dispenser




		pitcher




		vase




		tea pot


	Whether you’re just starting out or already a pro Image Creations is here to support you with the latest in image transfer technology!


		Image Creations Inc. is not responsible for typographical or photographical errors. Prices and specifications are subject to change without notice. All pricing is reflected in Canadian Funds.