|
Transfer Instructions:
* Prepare artwork and size transfer according to placement size of the imprintable.
* Image must be produced in reverse or “mirror image” to insure correct application
* Preheat press to 400 degrees F
* Prepress the imprintable for 10 seconds to get rid of any moisture
* Using heat resistant tape, secure the image to the object to keep it from moving
* Press at 400 degrees F for 25-35 seconds using Medium-Firm pressure
* Remove transfer while hot being careful not to let the paper shift across the surface of the object, as a “ghost”
image may appear.
* Let cool
Note: These instructions are guide lines only and are based on the inks, paper, and products we supply. Your inks, papers, etc. may require adjustments in your time/temp settings.
|
