Clocks


		Clock Kits

	Our clock kits are available in several different styles to accommodate a variety of tastes. Each Kit includes a sublimatable face, hands, motor, and a frame or stand. A customized clock can add a finishing touch to any room – wherever a clock is needed.

Part #	Description	Size	Case Qty	Each	Case
UNI1015	Wall Clock - Face Only - Hole In Middle	8.125" Round	20	3.55	3.45
UNI1027	Coaster Desk Clock Kit	4" Square	10	7.04	6.84
UNI5549	Desk Clock Kit	4.75" Round	10	9.45	9.18
UNI1028	Wall Clock Kit – No Lens, Black Frame, Clock Works	8.125" Round	10	12.36	12.01
UNI5627	Wall Clock Kit-0.045 Aluminum Face W/O Frame	8.125" Round	14	9.56	9.30
UNI5650	.045 Alum Clock Kit 8-1/8" W/Lens	8-1/8"	8	14.96	14.54
UNI5823	Wall clock	11.4” Round	10	14.88	14.46
UNI5724	Wall Clock – Face Only – Hole in the middle	8.125 x .045	25	4.90	4.76


	Mantle Clock Kit

Part #	Description	Size	Case Qty	Each	Case
UNI5756	Kit contains a 6x6 and 6x8 Tile, Clock Works w/Mahogany color frame	6”x 8”	2	19.75	19.20


		Offest Clock Kit

	Our clock kits are available in several different styles to accommodate a variety of tastes. This kit includes a ½” MDF body, motor and hands. The clock includes both a keyhole and a removable easel for wall or desk applications.

Part #	Description	Size	Case Qty	Each	Case
UNI5758	Offest clock	5.5” x 8”	8	7.94	7.72



						Silver Aluminum Clock Kit



				Unisub® Silver Aluminum Clock Kit, 8.125"x.045", Round (no frame. With works. These make lovely, durable clocks, just add logo or artwork!

Part #	Description	Size	Case Qty	Each	Case
UNI5947	Silver aluminum clock	8.125”x045”	14	9.56	9.30

Transfer Instructions for Unisub Hardboards:

* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image”
* Place a sheet of plain white paper on the press.
* Remove the protective plastic covering from the product.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
* Cover imprintable with a sheet of plain white paper.
* Press at 400 degrees F for 60-70 seconds using Medium pressure
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface
* If you are using an item that can be printed on both sides, allow the imprintable to cool to room temperature
before pressing the 2nd side. CLICK HERE to refer to the Unisub guide for additional instructions.

Note: These instructions are guide lines only and are based on the inks, paper, and products we supply. Your inks, papers, etc. may require adjustments in your time/temp settings.

Transfer Instructions for Unisub Metals:

* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image”
* Place a sheet of plain white paper on the press.
* Remove the protective plastic covering from the product.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
* Cover imprintable with a smooth absorbant paper towel
* Press at 400 degrees F for 60-70 seconds using Medium pressure
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface
- You can also try pressing the metal from the back side.

Additional Unisub transfer instruction CLICK HERE

Note: These instructions are guide lines only and are based on the inks, paper, and products we supply. Your inks, papers, etc. may require adjustments in your time/temp settings.

Transfer Instructions for Unisub Plastics:

* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image”
* Place a sheet of plain white paper on the press.
* Remove the protective plastic covering from the product.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
* Cover imprintable with a sheet of plain white paper
* Press at 400 degrees F for 60-70 seconds using Medium pressure
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface

Note: If you are using an item that can be printed on both sides allow the plastic to cool to room temperature before pressing the 2nd side. Refer to the Unisub pressing guide for additional instructions.CLICK HERE

Note: These instructions are guide lines only and are based on the inks, paper, and products we supply. Your inks, papers, etc. may require adjustments in your time/temp settings.


	Also Check Out...




		mugs




		chromaluxe




		sublimation ink




		tiles

Image Creations Inc. is not responsible for typographical or photographical errors. Prices and specifications are subject to change without notice. All pricing is reflected in Canadian Funds.