Sublimation Coasters


	Coasters


	Protect furniture and complement home décor with our imprintable coasters. Excellent for displaying business logs, artwork or your favorite photos.




		UNI1009




			UNI5677



				UNI5703


	UNI4015


	UNI5805


	UNI5685




		UNI5822

Part #	Description	Size	Case Qty	Each	Case	4+ Cases
UNI1009	Hardboard Coaster	4" square	40	0.95	0.91	0.89
UNI5677	Hardboard Coaster with Cork Bottom	3.75"x3.75"	40	1.25	1.19	1.17
UNI5703	Coaster - Fiber Reinforced Plastic (FRP)	3.625" Round	40	1.19	1.14	1.12
UNI5685	Wooden Coaster, Walnut, w/FRP Insert - See 5703 for Inserts -	3 5/8" Round	20	2.96	2.83	2.77
UNI5805	Wooden Coaster, Mahogany color, w/FRP Insert	4.25" x 4.25"	20	3.19	3.04	2.99
UNI5822	Cork-Backed Coaster Round	3.75" Round	40	1.40	1.34	1.31
UNI4015	Heart Shaped Coaster - HB with cork backing and black edges	3.8"x4"	40	1.43	1.37	1.34

Part #	Description	Size	Each Qty 1-9	Pack Qty 10	Case Qty 100
SCOAST-B	3 1/2” Ceramic Coaster with Black Rim	3 1/2” round	1.95	1.90	1.80

Part #	Description	Size	Each Qty 1-99	Pack Qty 100	Case Qty 500
SMCD	Deluxe Coasters with white fabric top and black base for imprinting with any heat transfer or direct screen printing	3.5”x3.5”x.25	0.50	0.48	0.45
SMCP	Promotional Coasters with white fabric top and black base for imprinting with any heat transfer or direct screen printing	3.5”x3.5”x.125	0.45	0.40	0.35

Part #	Description	Size	Case Qty	Each	Case	4+ Cases
UNI5795	Coaster Puzzle - Puzzled on what gift to give someone? Coaster puzzles make uniquely thoughtful gifts. Images from vacations, kids sport teams, pets, and weddings, to corporate promotional items, are sublimated into the entire, cork-backed puzzle. It sits on the table on display then breaks apart to be used as coaster. The 1/8” thick cork-backed coaster’s overall size and image area is 7.625 x 7.625 with black edges.	1/8”x7.625”x7.625”	10	5.97	5.70	5.59


	Coaster Holders


	Add value and enhance the presentation to your sublimated coasters with a holder.




		SCHMA




		SCHMB

Part #	Description	Size	Each Qty 1-11	Pack Qty 12	Case Qty 144
SCHMA	Iron Coaster Holder w/ curled corners for 4.25” coaster		5.49	5.35	4.95
SCHMB	Iron Coaster Holder w/ pronged corners for 4.25” coaster		5.49	5.35	4.95




		UNI5806


	UNI5701
	UNI5701

Part #	Description	Size	Case Qty	Each	Case	4+ Cases
UNI5701	Coaster Holder, slotted, Holds 4 Coasters, Mahogany	3”x3”	10	1.97	1.88	1.85
UNI5806	Wooden Coaster Holder with Fiber Reinforced Plastic Inserts. Inserts are 3.625” ssquare with rounded corners.	4.5”x5.2”x2.75”	5	8.49	8.11	7.95

Transfer Instructions for Unisub Hardboards:

* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image”
* Place a sheet of plain white paper on the press.
* Remove the protective plastic covering from the product.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
* Cover imprintable with a sheet of plain white paper.
* Press at 400 degrees F for 60-70 seconds using Medium pressure
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface
* If you are using an item that can be printed on both sides, allow the imprintable to cool to room temperature
before pressing the 2nd side. CLICK HERE to refer to the Unisub guide for additional instructions.

Note: These instructions are guide lines only and are based on the inks, paper, and products we supply. Your inks, papers, etc. may require adjustments in your time/temp settings.


	Transfer Instructions for Unisub Plastics: * Prepare artwork and size transfer according to the size and shape of the product. * Image must be produced in reverse or “mirror image” * Place a sheet of plain white paper on the press. * Remove the protective plastic covering from the product. * Using heat resistant tape, secure the image with the printed side of transfer facing the product * Lay the imprintable face up on the heat press so that you are pressing onto the transfer. * Cover imprintable with a sheet of plain white paper * Press at 400 degrees F for 60-70 seconds using Medium pressure * When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface Note: If you are using an item that can be printed on both sides allow the plastic to cool to room temperature before pressing the 2nd side. Refer to the Unisub pressing guide for additional instructions.CLICK HERE *Note*: These instructions are guide lines only and are based on the inks, paper, and products we supply. Your inks, papers, etc. may require adjustments in your time/temp settings.

	Transfer Instructions for Ceramic Coasters: * Prepare artwork and size transfer according to the size and shape of the product. * Image must be produced in reverse or “mirror image” * Place a rubber or felt pad on the press. * Place the transfer image side up on the rubber or felt pad. * Place the coaster facing down onto the transfer paper * Place a sheet of plain white paper on top * Press at 400 degrees F for 5-6 minutes using Light pressure * When pressing is finished carefully remove and allow to cool on a clean surface *Note*: These instructions are guide lines only and are based on the inks, paper, and products we supply. Your inks, papers, etc. may require adjustments in your time/temp settings.


	Sublimation Supplies


	Heat Presses


	Printer-Cutter


	Photo Crystals


	Cutters / Plotters


	Direct-To-Garment Printer


	Pad Printing


	Photo Glazing


	Screen Printing


	Heat Transfer Paper


	Heat Transfer Vinyls


	Heat Transfer Film


	ChromaBlast


	Prices and specifications are subject to change without notice. All pricing is reflected in Canadian Funds.