ICI Logo10 copy
Keychain square 1

uni5524 - square

Key Chains - (FPR)
keychain heart

uni5520 - heart
Key chain rectangle 2

uni5525 - rectangle
Keychain round

uni5521 - round
Keychain football

uni5766 - football

Part #

Key Chains - Unisub FRP Key tags are two sided 3/32” thick, with a hole for hardware.   Each includes either snap-on key chain hardware.

Size

Case Qty

Each

Case

UNI5520

Key Chain, (2 Side) - Heart

2.5"

50

1.33

1.29

UNI5521

Key Chain, (2 Side) - Round

2.5"

50

1.33

1.29

UNI5524

Key Chain, (2 Side) - Square

2.25"

50

1.33

1.29

UNI5525

Key Chain, (1 Side) - Rectangle

1.25"x3"

50

1.33

1.29

UNI5766

Key Chain, (2 Side) - Football

1.8"x3"

50

1.33

1.29
keychain aluminum

uni5995 - rectangle

Key Chains - (aluminum)
keychain oval

uni5917 - oval

Part #

Key Chains - Unisub Aluminum Key tags are two sided with a hole for hardware.   Each includes either snap-on key chain hardware.

Size

Case Qty

Each

Case

UNI5995

Key Chain, (2 Side) - Rectangle Aluminum

1.6"x2.25"

50

1.33

1.29

UNI5917

Key Chain, (2 Side) - Oval Aluminum

1.375"x2.75"

50

1.33

1.29
Key-chain-heart-image1

SKR-HRTG

Key Chains - (Metal)
Key-chain-oval-image-copy1

SKR-OVAL
Key-chain-rectangle-image-c

SKR-REC
Key-chain-round-image.jpg1

SKR-RND
Key-chain-teardrop-image1

SKR-TD

Part #

Key Ring - Metal Stylish Polished Metal Key Ring with sublimatable insert

Size

Case Qty

Each

Case

SKR-HRTG

Heart Shaped metal key ring with heart shaped sublimatable insert and presentation box.  Key ring size: 1 3/8”   Pendant size: 1 ½” x 1 ½””  Insert size: 7/8” x 7/8”

3 ” x 1 3/8”

20

3.55

3.20

SKR-OVAL

Oval Shaped key metal ring with oval shaped sublimatable insert and presentation box.  Key ring size: 1 3/8”   Pendant size: 2” x 1 1/4”  Insert size: 3/4” x 1 ¼”

 3 3/8” x 1 3/8”

20

3.55

3.20

SKR-REC

Rectangular Shaped metal key ring with rectangular sublimatable insert and presentation box.  Key ring size: 1 3/8”  Pendant size: 1 3/4” x 1 1/8”  Insert size: 1 1/8”x ¾”

3 3/8” x 1 3/8”

20

3.55

3.20

SKR-RND

Round Shaped key metal ring with circular  sublimatable insert and presentation box.  Key ring size: 1 3/8”   Pendant size: 1 7/8” x 1 3/8”  Insert size: 1” round

3 3/8” x 1 3/8”

20

3.55

3.20

SKR-TD

Tear Drop Shaped key metal ring with circular  sublimatable insert and presentation box.  Key ring size: 1 3/8”   Pendant size: 1 7/8” x 1 1/4”  Insert size: 1” round

3 3/8” x 1 3/8”

20

3.55

3.20

Transfer Instructions for Unisub Plastics:

  * Prepare artwork and size transfer according to the size and shape of the product.
  * Image must be produced in reverse or “mirror image”
  * Place a sheet of plain white paper on the press.
  * Remove the protective plastic covering from the product.
  * Using heat resistant tape, secure the image with the printed side of transfer facing the product
  * Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
  * Cover imprintable with a sheet of plain white paper
  * Press at 400 degrees F for 60-70 seconds using Medium pressure
  * When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface
 

Note: If you are using an item that can be printed on both sides allow the plastic to cool to room temperature before pressing the 2nd side.  Refer to the Unisub pressing guide for additional instructions.CLICK HERE

Note: These instructions are guide lines only and are based on the inks, paper, and products we supply. Your inks, papers, etc. may require adjustments in your time/temp settings.

Transfer Instructions for Unisub Metals:

  * Prepare artwork and size transfer according to the size and shape of the product.
  * Image must be produced in reverse or “mirror image”
  * Place a sheet of plain white paper on the press.
  * Remove the protective plastic covering from the product.
  * Using heat resistant tape, secure the image with the printed side of transfer facing the product
  * Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
  * Cover imprintable with a smooth absorbant paper towel
  * Press at 400 degrees F for 60-70 seconds using Medium pressure
  * When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface
     - You can also try pressing the metal from the back side.

Additional Unisub transfer instruction CLICK HERE

Note: These instructions are guide lines only and are based on the inks, paper, and products we supply. Your inks, papers, etc. may require adjustments in your time/temp settings.

Also Check Out...
2-sided_IDtag-Sport

ID tag
bag-tags

bag tags
Pet Tag 3

pet tag
epokerchips

poker chips

H-Sublimation-1

H-Heat-Press

H-Cutters

H-AnaJet

H-Direct-to-Substrate

H-Crystal2

H-Photoglazing

H-Pad-Printing

H-Screen-Printing

H-Transfer-Paper

H-Transfer-Vinyl

H-Chromablast
rollingflag

Image Creations Inc. is not responsible for typographical or photographical errors. Prices and specifications are subject to change without notice.  All pricing is reflected in Canadian Funds.