|
Transfer Instructions:
* Prepare artwork and size transfer according to placement size of the imprintable.
* Image must be produced in reverse or “mirror image” to insure correct application
* Preheat press to 400 degrees F
* Using heat resistant tape, secure the image to the object to keep it from moving
* Place a piece of paper on the bottom of the press.
* Place the item on the heat press with the transfer on top of the item.
* Cover transfer with a sheet of plain white paper
* Press at 400 degrees F for 35-45 seconds using Light - Medium pressure
* Remove transfer while hot
* Let cool
Note: These instructions are guide lines only and are based on the inks, paper, and products we supply. Your inks, papers, etc. may require adjustments in your time/temp settings.
|
