Sublimation Name Badges


		Name Badges

	Unisub opens the name badge market to a whole new world of color and excitement. You’ll be able to offer your customers greater value in terms of quality and impact.

Part #	Name Badges FRP	Size	Case Qty	Each	Case
UNI5501	Name Badge-Gloss	1"x3"	250	0.51	0.49
UNI5515	Name Badge-Matte, (1 Side)	1"x3"	250	0.51	0.49
UNI5502	Name Badge-Gloss	1.25"x3"	200	0.56	0.55
UNI5516	Name Badge-Matte, (1 Side)	1/25"x3"	200	0.56	0.55
UNI5786	Name Badge-Gloss	1.5”x3”	150	0.69	0.67
UNI5530	Name Badge-Gloss	2"x3"	150	0.75	0.73
UNI5531	Name Badge-Matte	2"x3"	150	0.75	0.73
UNI5532	Oval Name Badge-Gloss	1.5"x3"	150	0.69	0.67
UNI5533	Oval Name Badge-Matte	1.5"x3"	150	0.69	0.67
UNI5665	Round Button with pin	2 ½” round	50	0.92	0.90
UNI5619	Identifier Badge Frame-Gold Large	1.5 x 3	30	2.18	2.12
UNI5666	Lapel Pin	7/8” round	25	1.20	1.17
UNI5621	Identifier Large Badge Insert-Gloss	1.4375"x2.8125"	150	0.62	0.60
UNI5628	Identifier Large Badge Insert-Matte	1.4375"x2.8125"	150	0.62	0.60

Part #	Name Badges Aluminum	Size	Case Qty	Each	Case
UNI5730	Aluminum rectangle – square corners	1”x 3”	100	0.30	0.28
UNI5731	Aluminum rectangle – square corners	2.5” x 3.5”	50	0.54	0.52
UNI5735	Aluminum rectangle – round corners	1.5"x3"	200	0.59	0.57
UNI5749	Aluminum rectangle – round corners	3.375” x2.125”	50	0.81	0.78
UNI5736	Aluminum rectangle – round corners	2"x3"	150	0.81	0.78
UNI5732	Aluminum rectangle – round corners	5” x 7”	25	1.83	1.78
UNI5666	Aluminum Round Lapel Pin with Military Clutch, 7/8" diameter x .030", UV Resistant Topcoat.	7/8” dia x .030”	50	1.20	1.17
UNI5950	Aluminum rectangle - Silver	2”x3”	50	.96	0.92

Part #	Magnetic Nametag Backing	Size	Case Qty	Each	Case
MLS	Magnetic Nametag Backings Two piece magnet set. Great for name badges and badge holders. Keeps holes away from clothing.	1/2" x 1 3/4"	100	1.25	1.15

Transfer Instructions for Unisub Plastics:

* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image”
* Place a sheet of plain white paper on the press.
* Remove the protective plastic covering from the product.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
* Cover imprintable with a sheet of plain white paper
* Press at 400 degrees F for 60-70 seconds using Medium pressure
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface

Note: If you are using an item that can be printed on both sides allow the plastic to cool to room temperature before pressing the 2nd side. Refer to the Unisub pressing guide for additional instructions.CLICK HERE

Note: These instructions are guide lines only and are based on the inks, paper, and products we supply. Your inks, papers, etc. may require adjustments in your time/temp settings.

Transfer Instructions for Unisub Metals:

* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image”
* Place a sheet of plain white paper on the press.
* Remove the protective plastic covering from the product.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
* Cover imprintable with a smooth absorbant paper towel
* Press at 400 degrees F for 60-70 seconds using Medium pressure
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface
- You can also try pressing the metal from the back side.

Additional Unisub transfer instruction CLICK HERE

Note: These instructions are guide lines only and are based on the inks, paper, and products we supply. Your inks, papers, etc. may require adjustments in your time/temp settings.


	Also Check Out...



			bag tags




		magnets




		ID tags

Image Creations Inc. is not responsible for typographical or photographical errors. Prices and specifications are subject to change without notice. All pricing is reflected in Canadian Funds.