Sublimation Plaques


	Plaques


	The days of boring plaques are gone forever! Unisub plaques allow you to combine photos and text into a colorful work of art. These 5/8” MDF plaques are available with either a black or cherry edge finish, and are keyholed for easy mounting.

Part #	Award Plaques - Black Edge	Size	Case Qty	Each	Case
UNI5669	Plaque-Black Edge Imaging area: 3 3/8" X 5 7/8"	5"x7"	28	3.07	2.98
UNI1001	Plaque-Black Edge Imaging Area: 4.75" X 6.75"	6"x8"	21	4.07	3.96
UNI1002	Plaque-Black Edge Imaging Area: 5.75" X 7.75"	7"x9"	20	4.92	4.78
UNI1003	Plaque-Black Edge Imaging Area: 7" X 9"	8"x10"	14	5.49	5.34
UNI1004	Plaque-Black Edge Imaging Area: 7.75" X 10.75"	9"x12"	12	7.25	7.05

Part #	Award Plaques - Cherry Edge	Size	Case Qty	Each	Case
UNI5670	Plaque-Cherry Edge Imaging area: 3 3/8" X 5 7/8"	5"x7"	28	3.07	2.98
UNI1005	Plaque-Cherry Edge Imaging Area: 4.75" X 6.75"	6"x8"	21	4.07	3.96
UNI1006	Plaque-Cherry Edge Imaging Area: 5.75" X 7.75"	7"x9"	20	4.92	4.78
UNI1007	Plaque-Cherry Edge Imaging Area: 7" X 9"	8"x10"	14	5.49	5.34
UNI1008	Plaque-Cherry Edge Imaging Area: 7.75" X 10.75"	9"x12"	12	7.25	7.05

Part #	Shield Plaques	Size	Case Qty	Each	Case
UNI5745	Shield Plaque - Black Edge	5"x6"	15	7.63	7.42
UNI5616	Shield Plaque - Black Edge Imaging Area: 6.43" x 8.75"(approx).	7"x9"	6	11.46	11.14

Part #	Homeplate Plaques	Size	Case Qty	Each	Case
UNI5679	Homeplate Plaque -Black Edge Imprinting area: 33 sq in,	6"x6"	15	4.98	4.84
UNI5680	Homeplate Plaque -Black Edge Imprinting area: 69 sq in	10"x10"	12	9.90	9.62

Part #	Flat Edge Plaques	Size	Case Qty	Each	Case
UNI5664	Plaque-Black Edge w/flat profile- Perpetual Plaque, Black Flat Edge, 8" x 10" x 5/8"MDF, Imaging Area: 7" x 9". These quality plaques feature a flat edge for a larger imprint area and two keyholes for easy wall mounting	8"x10"	14	5.49	5.34

Part #	Single Sided Aluminum	Size	Case Qty	Each	Case
UNI5667	Aluminum Plaque Plate Sheet - 5"x7" Sheet for 5"x7" Plaque, .030" thick. Good spare for UNI5781, UNI5669 or UNI5670	5"x7"	25	1.63	1.59
UNI5668	Aluminum Plaque Plate Sheet	6"x8"	25	1.96	1.90

Part #	Plaque - Cross	Size	Case Qty	Each	Case
UNI5783	Cross Plaque, with HardBoard Oval Tile Insert (4.2" x 5.9"), ¾” Mahogany Stained Wood Base (7" x 11"), Keyholed With .25” Thick Oval Hardboard Tile and 2-Sided Tape for Mounting to the Cross Base.	7” x 11”	10	4.68	4.55

Part #	Plaque - Football	Size	Case Qty	Each	Case
UNI5757	Black profiled edges and Keyholed Imaging Area: 47 sq in	10.5”:x6.25”	12	10.39	10.10

Part #	Plaque - Round	Size	Case Qty	Each	Case
UNI5765	They’re just the ticket for all types of Sports Awards and Gifts: Baseball, Softball, Basketball, Golf, Tennis, Volleyball. They are 5/8” thick and 8.125” Round with black modified bevel edges. Their backsides are black with a Keyhole for fast and easy mounting.	.625” x 8.125”	12	10.39	10.10

Part #	Plaque - Ultra Gloss This classy new plaque “rises” above the rest. A ¼” spacer allows the plaque face to float over the surface for a sophisticated look. Includes a piano finish black base plaque, pre-cut Unisub aluminum, and a hardboard space with double-sided tape.	Size	Case Qty	Each	Case
UNI5781	Ultra Gloss plaque w 5” x 7” face plate	7” x 9”	18	6.45	6.27
UNI5782	Ultra Gloss plaque w 5.75” x 7.75” face plate	8” x 10”	13	7.44	7.23

Part #	Plaque & Plaque/Clock - Oversized Oversized plaques allow you to create “employee of the month” plaques or special recognition awards. The image area of each plaque can be sublimated with a 14”x16” heat press.	Size	Case Qty	Each	Case
UNI5581	Perpetual Plaque with Clock Imaging Area: 10.43" x 14.75".	11.625"x16"	6	20.95	20.37
UNI5584	Large Plaque-Black Edge Imaging Area: 10.43" x 14.75".	11.625"x16"	7	13.81	13.43

Transfer Instructions for Unisub MDF:

* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image”
* Place a sheet of plain white paper on the press.
* Remove the protective plastic covering from the product.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
* Cover imprintable with a sheet of plain white paper.
* Press at 400 degrees F for 80-90 seconds using Medium pressure
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface
* If you are using an item that can be printed on both sides, allow the imprintable to cool to room temperature
before pressing the 2nd side. CLICK HERE to refer to the Unisub guide for additional instructions.

Note: These instructions are guide lines only and are based on the inks, paper, and products we supply. Your inks, papers, etc. may require adjustments in your time/temp settings.

Transfer Instructions for Unisub Metals:

* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image”
* Place a sheet of plain white paper on the press.
* Remove the protective plastic covering from the product.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
* Cover imprintable with a smooth absorbant paper towel
* Press at 400 degrees F for 60-70 seconds using Medium pressure
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface
- You can also try pressing the metal from the back side.

Additional Unisub transfer instruction CLICK HERE

Note: These instructions are guide lines only and are based on the inks, paper, and products we supply. Your inks, papers, etc. may require adjustments in your time/temp settings.

Image Creations Inc. is not responsible for typographical or photographical errors. Prices and specifications are subject to change without notice. All pricing is reflected in Canadian Funds.