Sublimation Puzzles

Item	Puzzles Jigsaw puzzle onto which you can sublimate, break apart, and put together again.	Size	Each Qty 1-9	Pack Qty 10	Case Qty 100
SPZ-30C	30 Piece Sublimation Puzzle – High Gloss finish - Sold in packs of 10 - Individual samples available at $5.25 each	7.5"x9.5"	5.25	4.40	4.00
SPZ-110C	110 Piece Sublimation Puzzle – High Gloss finish- Sold in packs of 10 - Individual samples available at $5.25 each	7.5"x9.5"	5.25	4.40	4.00
SPZ-252C	252 Piece Sublimation Puzzle – High Gloss finish- Sold in packs of 10 - Individual samples available at $9.65 each	10.5"x13.25"	9.65	7.95	7.55
SPZ-BOX	Puzzle Box - white 12” x 4.75” x 1.25”	12” x 4.75” x 1.25”	0.65	0.60	0.55

Part #	Hardboard Jigsaw Puzzles	Size	Case Qty	Each	Case	4+ Cases
UNI5830	rectangle - 30 piece	6.8”x9.8”	10	9.09	8.68	8.52
UNI5831	rectangle - 60 piece	6.8”x9.8”	10	11.98	11.45	11.23
UNI5833	Heart Puzzle - 22 piece	6.7”	10	7.49	7.16	7.02
UNI5834	Circle Puzzle - 24 piece	6.7”	10	7.49	7.16	7.02

Transfer Instructions:

* Prepare artwork and size transfer according to placement size of the imprintable.
* Image must be produced in reverse or “mirror image” to insure correct application
* Preheat press to 400 degrees F
* Using heat resistant tape, secure the image to the object to keep it from moving
* Place a piece of paper on the bottom of the press.
* Place the item on the heat press with the transfer on top of the item.
* Cover transfer with a sheet of plain white paper
* Press at 400 degrees F for 40-55 seconds using Light - Medium pressure
* Remove transfer while hot
* Let cool

Note: These instructions are guide lines only and are based on the inks, paper, and products we supply. Your inks, papers, etc. may require adjustments in your time/temp settings.

Transfer Instructions for Unisub Hardboards:

* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image”
* Place a sheet of plain white paper on the press.
* Remove the protective plastic covering from the product.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
* Cover imprintable with a sheet of plain white paper.
* Press at 400 degrees F for 60-70 seconds using Medium pressure
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface
* If you are using an item that can be printed on both sides, allow the imprintable to cool to room temperature
before pressing the 2nd side. CLICK HERE to refer to the Unisub guide for additional instructions.

Note: These instructions are guide lines only and are based on the inks, paper, and products we supply. Your inks, papers, etc. may require adjustments in your time/temp settings.


	Also Check Out...



			coaster puzzle




		drinking glass




		cd/dvd case




		candy jar


	Sublimation Supplies


	Heat Presses


	Printer-Cutter


	Photo Crystals


	Cutters / Plotters


	Direct-To-Garment Printer


	Pad Printing


	Photo Glazing


	Screen Printing


	Heat Transfer Paper


	Heat Transfer Vinyls


	Heat Transfer Film


	ChromaBlast


	Prices and specifications are subject to change without notice. All pricing is reflected in Canadian Funds.