Sublimation Starter Kits


	UniSub Starter Kits

Part #	Starter Kits	Size	Case Qty	Each
UNI1017	WOOD PRODUCTS STARTER KIT – Assortment of Unisub wood products, including clock kits, clipboards, dry erase boards, plaques and coasters	n/a	1	72.56

Part #	Starter Kits	Size	Case Qty	Each
UNI5569	INTERIOR SIGNAGE STARTER KIT – Samples of each Unisub EZ Signs, FR Plastic oval door plates, sign inserts and name badges.	n/a	1	72.56

Part #	Starter Kits	Size	Case Qty	Each
UNI5644	JEWELRY STARTER KIT – Samples of Unisub jewelry, CD-ROLM with over 50 jewelry designs, counter sign, sales/instruction sheet, & window/wall poster	n/a	1	70.90

Part #	Starter Kits	Size	Case Qty	Each
UNI5645	FRP PLASTICS STARTER KIT – Assortment of Unisub FR Plastic name badges, bag tags, license plates, holiday ornaments, & other items.	n/a	1	72.56

Part #	Test Piece Kit	Size	Case Qty	Each
UNI5653	TEST PIECE KIT- Includes 50 assorted pieces of 4”x4” Unisub hardboard, FR Plastic & Aluminum	4” x 4”	1	23.11

Transfer Instructions for Unisub Metals:

* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image”
* Place a sheet of plain white paper on the press.
* Remove the protective plastic covering from the product.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
* Cover imprintable with a smooth absorbant paper towel
* Press at 400 degrees F for 60-70 seconds using Medium pressure
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface
- You can also try pressing the metal from the back side.

Additional Unisub transfer instruction CLICK HERE

Note: These instructions are guide lines only and are based on the inks, paper, and products we supply. Your inks, papers, etc. may require adjustments in your time/temp settings.

Transfer Instructions for Unisub Hardboards:

* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image”
* Place a sheet of plain white paper on the press.
* Remove the protective plastic covering from the product.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
* Cover imprintable with a sheet of plain white paper.
* Press at 400 degrees F for 60-70 seconds using Medium pressure
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface
* If you are using an item that can be printed on both sides, allow the imprintable to cool to room temperature
before pressing the 2nd side. CLICK HERE to refer to the Unisub guide for additional instructions.

Note: These instructions are guide lines only and are based on the inks, paper, and products we supply. Your inks, papers, etc. may require adjustments in your time/temp settings.

Transfer Instructions for Unisub Plastics:

* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image”
* Place a sheet of plain white paper on the press.
* Remove the protective plastic covering from the product.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
* Cover imprintable with a sheet of plain white paper
* Press at 400 degrees F for 60-70 seconds using Medium pressure
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface

Note: If you are using an item that can be printed on both sides allow the plastic to cool to room temperature before pressing the 2nd side. Refer to the Unisub pressing guide for additional instructions.CLICK HERE

Note: These instructions are guide lines only and are based on the inks, paper, and products we supply. Your inks, papers, etc. may require adjustments in your time/temp settings.

Image Creations Inc. is not responsible for typographical or photographical errors. Prices and specifications are subject to change without notice. All pricing is reflected in Canadian Funds.