ICI Logo10 copy
ICI bar copy
sticky-note-holder
sticky note holder

Sticky Note Holder

Part #

Sticky Note Holder

Size

Case Qty

Each

Case

UNI5681

Sticky-Note Holder  - Our sticky note holder is a perfect gift for schools, businesses and home decor alike.  The hardboard holder measures 5.375”x3.125” when assembled after sublimation.  Stick notes are not included

5.375”x3.125”

25

1.92

1.87

Part #

Sticky Note Holder

Size

Case Qty

Each

Case

UNI5784

Wooden Sticky Noteholder - The Noteholder is designed so it can be configured in either portrait or landscape orientation and still be functional. It’s a beautiful high end looking product.       

¾”X4.32X6.25 Wood Base

2X3.5
Metal Insert

10

4.80

4.67

Transfer Instructions for Unisub Hardboards:

  * Prepare artwork and size transfer according to the size and shape of the product.
  * Image must be produced in reverse or “mirror image”
  * Place a sheet of plain white paper on the press.
  * Remove the protective plastic covering from the product.
  * Using heat resistant tape, secure the image with the printed side of transfer facing the product
  * Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
  * Cover imprintable with a sheet of plain white paper.
  * Press at 400 degrees F for 6-70 seconds using Medium pressure
  * When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface
  * If you are using an item that can be printed on both sides, allow the imprintable to cool to room temperature
     before pressing the 2nd side.  CLICK HERE to refer to the Unisub guide for additional instructions.

Note: These instructions are guide lines only and are based on the inks, paper, and products we supply. Your inks, papers, etc. may require adjustments in your time/temp settings.

Transfer Instructions for Unisub Metals:

  * Prepare artwork and size transfer according to the size and shape of the product.
  * Image must be produced in reverse or “mirror image”
  * Place a sheet of plain white paper on the press.
  * Remove the protective plastic covering from the product.
  * Using heat resistant tape, secure the image with the printed side of transfer facing the product
  * Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
  * Cover imprintable with a smooth absorbant paper towel
  * Press at 400 degrees F for 60-70 seconds using Medium pressure
  * When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface
     - You can also try pressing the metal from the back side.

Additional Unisub transfer instruction CLICK HERE

Note: These instructions are guide lines only and are based on the inks, paper, and products we supply. Your inks, papers, etc. may require adjustments in your time/temp settings.

Also Check Out...
Pencil Case

pencil case
Unisub-aluminum-wall-clocks

clocks
name-badges1

name badges
pencil-holder

pencil caddy

Whether you’re just starting out or already a pro Image Creations is here to support you with
the latest in image transfer technology! 

H-Sublimation-1

H-Heat-Press

H-Cutters

H-AnaJet

H-Direct-to-Substrate

H-Crystal2

H-Photoglazing

H-Pad-Printing

H-Screen-Printing

H-Transfer-Paper

H-Transfer-Vinyl

H-Chromablast

Image Creations Inc. is not responsible for typographical or photographical errors. Prices and specifications are subject to change without notice.  All pricing is reflected in Canadian Funds.