Sublimation ID / Dog Tags
ID/Dog Tags – Unisub I.D. Tags offer a combination of quality and value that is ideal for schools, sports teams, clubs and organizations as well as personal gifts.
ID / Dog Tag Aluminum White
Item UNI5588 * ID/Dog Tag: Aluminum White (1 side) Gloss Size 1.125” x 2”
Qty 50/case – Broken cases billed as each.
$2.26 ea less than case qty
$1.91 ea per case qty
$1.77 ea per 4+ case qty
ID / Dog Tag Aluminum White
Item UNI5916 * ID/Dog Tag: Aluminum White (2 sided) Gloss Size 1.125” x 2”
Qty 50/case – Broken cases billed as each.
$2.68 ea less than case qty
$2.26 ea per case qty
$2.09 ea per 4+ case qty
ID / Dog Tag Aluminum Clear
Item UNI4004 * ID/Dog Tag: Aluminum Silver (1 side) Gloss Size 1.125” x 2”
Qty 50/case – Broken cases billed as each.
$2.23 ea less than case qty
$1.88 ea per case qty
$1.74 ea per 4+ case qty
Bead Chain w/Jump Ring
Item UNI5605 * Bead Chain w/Jump Ring – for ID/Dog Tag Size 30”
Qty 50/case – Broken cases billed as each.
$1.95 ea less than case qty
$1.64 ea per case qty
$1.52 ea per 4+ case qty
* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image”
* Place a sheet of plain white paper on the press.
* If the product has a protective plastic covering remove it.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
* Cover imprintable with parchment or paper
* Single Sided – Press at 385 degrees F for 35-45 seconds using Medium pressure
* Double Sided – Press at 385 degrees F for 40-50 seconds using Medium pressure (2 sides at a time)
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface
Note: If you are using an item that can be printed on both sides allow the metal to cool to room temperature before pressing the 2nd side. Refer to the Unisub pressing guide for additional instructions.
These transfer instruction guidelines were created using a Swing-Away GeoKnight Press, size 20″ x 24″/508 x 609.6 mm with pressure of 60 PSI. They represent the best, most general instructions we can provide. Please remember that heat presses may vary. Check with your press manufacturer for any special concerns. This information may change as we make continual improvements and refine our processes. These instructions are guide lines only and are based on the inks, paper, and products we supply. Your inks, papers, etc. may require adjustments in your time/temp settings.