USB Flash Drives
USB Flash Drive
Item UNISUSB-8 * 8 GB Flash Drive with Sublimatable White Metal Insert Size: 2.2” x 0.66” x 0.35”
Qty12/case – Broken cases billed as each.
$10.65 ea less than case
$9.93 ea per case qty
$9.40 ea per 4+ case qty
* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image”
* Place a sheet of plain white paper on the press.
* If the product has a protective plastic covering remove it.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
* Cover imprintable with parchment or paper
* Press at 400 degrees F for 45-50 seconds using Medium pressure
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface
– You can also try pressing the metal from the back side
Note: These instructions are guide lines only and are based on the inks, paper, and products we supply. Your inks, papers, etc. may require adjustments in your time/temp settings.