Keepsake Boxes
Keepsake Display Case Deluxe – These Premium Lacquered wooden keepsake boxes make great gifts for special occasions such as weddings, anniversaries, and more! The lids accept a custom imprinted tile and the inside of the boxes are lined with a synthetic color coordinated foam lining. Includes tile.
Keepsake Display Case Deluxe
Item SMB-44 * Keepsake Box w/ 4.25” x 4.25” tile : Size 5.8”x 5.8”x 2.25”
Qty 24/case – Broken cases billed as each.
$17.95 ea less than case qty
$17.30 ea per case qty
$17.05 ea per 4+ case qty
Keepsake Display Case Deluxe
Item SMB-66 * Keepsake Box w/ 6” x 6” tile : Size 7.12″x 7.12”x 2.75”
Qty 24/case – Broken cases billed as each.
$23.46 ea less than case qty
$22.94 ea per case qty
$22.33 ea per 4+ case qty
Keepsake Display Case Spare Insert
Item UNI5711 * Spare white gloss insert for UNI5989 keepsake box. Size 5″x7″. Thickness 0.045″.
Qty 10/case – Broken cases billed as each.
$8.25 ea less than case qty
$6.69 ea per case qty
$6.38 ea per 4+ case qty
* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image”
* Place a sheet of plain white paper on the press.
* If the product has a protective plastic covering remove it.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
* Cover imprintable with parchment or paper
* Press at 385 degrees F for 110-120 seconds using Medium pressure (single side)
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface
Note: If you are using an item that can be printed on both sides allow the metal to cool to room temperature before pressing the 2nd side. Refer to the Unisub pressing guide for additional instructions.
* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image” to insure correct application
* Place a neomex felt pad on the bottom platform of the press
* Lay the imprint transfer face up on the neomex pad
* The product is placed coated side face down. (the artwork is between the product and the nomex pad)
* Cover product with a sheet of plain white paper.
* For Ceramic 4×4 tiles Press at 400 degrees F for 5-6 minutes using Medium to heavy pressure
* For Ceramic 6×6 tiles Press at 400 degrees F for 6-7 minutes using Medium to heavy pressure
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface
These transfer instruction guidelines were created using a Swing-Away GeoKnight Press, size 20″ x 24″/508 x 609.6 mm with pressure of 60 PSI. They represent the best, most general instructions we can provide. Please remember that heat presses may vary. Check with your press manufacturer for any special concerns. This information may change as we make continual improvements and refine our processes. These instructions are guide lines only and are based on the inks, paper, and products we supply. Your inks, papers, etc. may require adjustments in your time/temp settings.