Image Creations Inc.

TEL: 800-260-2704 | Fax: 403-938-1016 | E-Mail: [email protected]

Your Image Transfer Specialists

ICI logo web

Mug Heat Presses

Features

  • Fully digital temperature control.
  • Automatic digital timer.
  • Programmable presets.
  • Solid steel welded framework.
  • SuperCoil-Microwinding™ heater technology.
  • Soft heater liner for accommodating inconsistent mugs.
  • Temperature readout accuracy +-2°F.
  • User selectable end-of-cycle alarms.
  • Records number of pressing cycles done.

Warranty

  • FREE LIFETIME Tech Support!
  • 3-year/3,000 mug warranty on heat platen.
  • 5-year warranty on frame
  • 3-year warranty on controller
  • 1 year warranty on parts

Geo Knight DK3 Mug Press

Manufactured in North America,

The DK3 Digital Mug Press is a specialty press in the Digital Knight line of presses; exclusively for pressing mugs. This press is a full wrap-around, handle to handle, top-to-bottom printing mug press. It can press images up to 5″ high, and as close as 1/2″ from the handle, depending on the mug size.

The DK3 is fully adjustable, accommodating all cylindrical mugs available on the market. This includes 11 oz, 15 oz, 16 oz mugs, steins and stainless steel travel mugs. (…but not tapered latte mugs…) The ability of the press to open extra wide allows for easy and fast loading and unloading of mugs from the press. The thick solid steel framework and die-cast clamp assembly provides a heavy duty framework for non-stop use. The clamp assembly can be adjusted for very heavy pressure, allowing for full bleed transfers on even the most demanding mugs. Finally – a mug press that compensates for less than perfectly straight mugs!

As with all Digital Knight presses, the DK3 utilizes a state-of-the-art digital control system with an unprecedented 3-year warranty on the heat-control electronics. With digital temperature, time and programmable presets, cycle counter and many other features, the consistency and productivity of mug printing is maximized.

At the heart of the DK3 is the SuperCoil-Microwinding™ heater technology, a system of embedded heater windings that wind tightly and closely together throughout the entire platen for extremely even heat, fast recovery & fast heat up times. The DK3 will start up in only a few minutes, and unlike other presses runs constantly at the set temperature, instead of a much lower idle temperature. Unlike other mug presses that use silicone blankets with short lifespans and even shorter warranties, the DK3 boasts an amazing 3-Year / 3,000 mug warranty. The patented stainless steel mug band heater technology Geo Knight is famous for has proven to be far more reliable in the field than traditional methods.

For the absolute best, at an amazing price, there is no better solution for pressing mugs than the DK3 Digital Knight Mug Press.

Dimensions: (L x W x H) 15″ x 15″ x 13″Electric: 120V / 450W / 4Amp
•Fully digital temperature control
•Automatic digital timer
•Programmable presets
•Solid steel welded framework
•SuperCoil-Microwinding™ heater technology
•Soft heater liner for accommodating inconsistent mugs
•Temperature readout accuracy +-2°F
•User selectable end-of-cycle alarms
•Records number of pressing cycles done
1 Year Warranty on Entire Press
3 Year Warranty on Control
3 Year/3,000 Mug Warranty on Heat Platen

Geo Knight DK3T for Latte / Tapered Mugs

Manufactured in North America, the Geo Knight DK3T mug press is a full wrap-around, handle to handle, top-to-bottom printing mug press. It can press images up to 5″high, and as close as 1/2″ from the handle, depending on the mug size.  Fully digital temperature control.  Automatic digital timer.  SuperCoil-Microwinding heater technology.  User selectable end-of-cycle alarms.  Programmable resets. 3-year / 3000 mug warranty on heating platen.  Records number of pressing cycles done. 

Features

  • Fully digital temperature control.
  • Automatic digital timer.
  • Programmable presets.
  • Solid steel welded framework.
  • SuperCoil-Microwinding™ heater technology.
  • Soft heater liner for accommodating inconsistent mugs.
  • Temperature readout accuracy +-2°F.
  • User selectable end-of-cycle alarms.
  • Records number of pressing cycles done.

Warranty

  • FREE LIFETIME Tech Support!
  • 3-year/3,000 mug warranty on heat platen.
  • 5-year warranty on frame
  • 3-year warranty on controller
  • 1 year warranty on parts

Geo Knight DK3D Double Wide Mug Press

Manufactured in North America, the DK3D Digital Double-Wide Mug Press has all the same features of the DK3, but with a 10″ long heater.

This press is a full wrap-around, handle to handle, top-to-bottom printing mug press. It can press images up to 10″ high, and as close as 1/2″ from the handle, depending on the mug size. The DK3 can also print 2 normal sized matching mugs simultaneously!

The DK3D is fully adjustable, accommodating all cylindrical mugs available on the market. This includes standard 11 oz, 15 oz, 16 oz mugs, steins and stainless steel travel mugs. (…but not tapered latte mugs…) PLUS, EXTRA TALL water bottles, thermoses, travel mugs and much more!

The ability of the press to open extra wide allows for easy and fast loading and unloading of mugs from the press. The thick solid steel framework and die-cast clamp assembly provides a heavy duty framework for non-stop use. The clamp assembly can be adjusted for very heavy pressure, allowing for full bleed transfers on even the most demanding mugs. Finally – a mug press that compensates for less than perfectly straight mugs!

As with all Digital Knight presses, the DK3D utilizes a state-of-the-art digital control system with an unprecedented 3-year warranty on the heat-control electronics. With digital temperature, time and programmable presets, cycle counter and many other features, the consistency and productivity of mug printing is maximized.

At the heart of the DK3D is the SuperCoil-Microwinding™ heater technology, a system of embedded heater windings that wind tightly and closely together throughout the entire platen for extremely even heat, fast recovery & fast heat up times. The DK3D will start up in only a few minutes, and unlike other presses runs constantly at the set temperature, instead of a much lower idle temperature. Unlike other mug presses that use silicone blankets with short lifespans and even shorter warranties, the DK3D boasts an amazing 3-Year / 3,000 mug warranty. The patented stainless steel mug band heater technology Geo Knight is famous for has proven to be far more reliable in the field than traditional methods.

For the absolute best, at an amazing price, there is no better solution for pressing mugs than the DK3D Digital Knight Double-Wide Mug Press.

Geo Knight DK-MUG Full-Wrap Attachment

Manufactured in North America, the full wrap mug attachment for the Digital Combo press (DC16)  uses the same exact super-robust heater band & pressure adjustment as the DK3. All standard cylindrical sublimatable items can be pressed on the Full Wrap Mug Attachment as are done on the DK3. The Digital Combo press controls the temperature and serves as a timer for this instant plug-in attachment! Compatible with All DC models.