Clocks

Clock Kits: Our clock kits are available in several different styles to accommodate a variety of tastes.
Each Kit includes a sublimatable face, hands, motor, and a frame or stand.
A customized clock can add a finishing touch to any room – wherever a clock is needed.

Sublimation Alarm Clock

Item SCLOCK  *  Sublimation Alarm Clock
1.  Large LCD screen 
2.  Glowing LED light with 7 different colors changing. 
3.  Support 12-hour & 24-hour time format, calendar, ‘C &’F temperature and alarm. 
4.  Powered by 3xAAA batteries (not included) 
5.  Size:3″x 3″x 3″
6.  3 sides printable 
7.  CE Approved 
8.  Packing: Gift box for each item
Qty 10/case – Broken cases billed as each.
$11.95 ea less than case
$10.35 ea per case
$9.90 ea per 4+ cases

Wall Clock Kit

Item UNI1028  *  MDF face, black frame, clock works, no lens   Size 8.125” round
Qty 10/case – Broken cases billed as each.
$27.26 ea less than case
$23.78 ea per case
$22.96 ea per 4+ cases

 

Wall Clock - Face Only

Item UNI1015  *  MDF – Size 8.125” round
Qty 20/case – Broken cases billed as each.
$6.82 ea less than case
$5.95 ea per case
$5.74 ea per 4+ cases

 

Wall Clock Kit

Item UNI5650  * Aluminum white face, black frame, clock works, with lens   Size 8.125” round
Qty 8/case – Broken cases billed as each.
$32.81 ea less than case
$28.61 ea per case
$27.63 ea per 4+ cases 

 

Wall Clock Kit

Item UNI5627  * Aluminum white face and clock works   Size 8.125” round
Qty 14/case – Broken cases billed as each.
$20.98 ea less than case
$18.30 ea per case
$17.67 ea per 4+ cases

 

Wall Clock Face Only

Item UNI5724  * Aluminum White   Size 8.125” round
Qty 25/case – Broken cases billed as each.
$9.37 ea less than case
$8.60 ea per case
$8.22 ea per 4+ cases

 

Wall Clock Kit

Item UNI5947  * Aluminum Clear face and clock works   Size 8.125” round x .045”
Qty 14/case – Broken cases billed as each.
$20.98 ea less than case
$18.30 ea per case
$17.67 ea per 4+ cases 

 

Wall Clock Face Only

Item UNI5947-F  * Wall Clock Face Only    Aluminum Clear   Size 8.125” round
Qty 25/case – Broken cases billed as each.
$9.37 ea less than case
$8.60 ea per case
$8.22 ea per 4+ cases 

 

Wall Clock Kit

Item UNI5823  * Aluminum white face and clock works   Size 11.4” round
Qty 10/case – Broken cases billed as each.
$32.48 ea less than case
$28.62 ea per case
$27.63 ea per 4+ cases

 

Desk Clock Kit

Item UNI5549  * FRP – Size 4.75” round
Qty 10/case – Broken cases billed as each.
$20.83 ea less than case
$18.17 ea per case
$17.54 ea per 4+ cases

 

Offset Clock Kit

Item UNI5758  * This kit includes a ½” MDF body, motor and hands.  The clock includes both a keyhole and a removable easel for wall or desk applications.   Size 6”
Qty 8/case – Broken cases billed as each.
$17.70 ea less than case
$15.43 ea per case
$14.90 ea per 4+ cases

 

Hinged Clock Kit

Item UNI5892  * Chromaluxe™ Clock Kit with Clock Works, THB, 5”x7” x 1/4” (x2)
Qty 6/case – Broken cases billed as each.
$25.07 ea less than case
$23.01 ea per case
$21.98 ea per 4+ cases

 

Mantel Clock Kit

Item UNI5756  * Wooden Stand, Mahogany Finish, Free-Standing or Keyhole Wall Mount 6” x 6” THB Clock Face with Center Hole, 6” x 8” THB Decorative Panel and Clockworks with 2 Hands   Size 15.5” x 6.75”
Qty 2/case – Broken cases billed as each.
$48.33 ea less than case 
$42.16 ea per case
$40.70 ea per 4+ cases

Item UNI5683  * Spare  Hardboard Gloss White Tile insert for UNI5756 Mantel Clock  Size 6”x 6” 
Case qty = 26
$3.96 ea qty less than case
$3.50 ea qty per case
$3.35 ea qty 4+ cases

 

Plaque Clock Kit

Item UNI5581  * Unisub™ Perpetual Plaque Clock. Clockworks; 2 Hands; Fiberboard Plaque, Offset Center Hole, Key Hole Wall Mount, Black Ogee Edge,   Size: 11 5/8”x16”x ¾”, Vertical-Standing, Image Area: 10 7/16”x14¾”
Qty 2/case – Broken cases billed as each
$40.38 ea less than case
$35.22 ea per case
$34.01 ea per 4+ cases

 
 

* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image” 
* Place a sheet of plain white paper on the press.
* If the product has a protective plastic covering remove it.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
* Cover imprintable with parchment or paper 
* Press at 400 degrees F for 75-55 seconds using Medium pressure
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface

Note: These instructions are guide lines only and are based on the inks, paper, and products we supply.   Your inks, papers, etc. may require adjustments in your time/temp settings.

* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image” 
* Place a sheet of plain white paper on the press.
* If the product has a protective plastic covering remove it.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
* Cover imprintable with parchment or paper 
* Press at 400 degrees F for  85-90 seconds using Medium pressure
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface

Note: These instructions are guide lines only and are based on the inks, paper, and products we supply.   Your inks, papers, etc. may require adjustments in your time/temp settings.

* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image” 
* Place a sheet of plain white paper on the press.
* If the product has a protective plastic covering remove it.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
* Cover imprintable with parchment or paper 
* Press at 400 degrees F for 75-90 seconds using Medium pressure
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface

Note: These instructions are guide lines only and are based on the inks, paper, and products we supply.   Your inks, papers, etc. may require adjustments in your time/temp settings.

* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image” 
* Place a sheet of plain white paper on the press.
* If the product has a protective plastic covering remove it.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
* Cover imprintable with parchment or paper 
* Press at 400 degrees F for 90-95 seconds using Medium pressure
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface

Note: These instructions are guide lines only and are based on the inks, paper, and products we supply.   Your inks, papers, etc. may require adjustments in your time/temp settings.