Sublimation Pet Tags

Pet Tag Heart
Item UNI4737 * Pet Tag – Heart – 2 sided Gloss White Size 1.25”x 1.38”x 0.045″
Qty 25/case – Broken cases billed as eachprice
$2.05 ea less than case qty
$1.73 ea per case qty
$1.60 ea per 4+ case qty

Pet Tag Bone
Item UNI4738 * Pet Tag – Dog Bone – 2 sided Gloss White Size 1.5”x 1”x 0.045″
Qty 25/case – Broken cases billed as each price
$2.05 ea less than case
$1.73 ea per case qty
$1.60 ea per 4+ case qty

Pet Tag Circle
Item UNI4739 * Pet Tag – Circle – 2 sided White Gloss Size 1.25”x 1.5”x 0.045″
Qty 25/case – Broken cases billed as each price
$2.05 ea less than case
$1.73 ea per case qty
$1.60 ea per 4+ case qty
* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image”
* Place a sheet of plain white paper on the press.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
* Cover imprintable with parchment or paper
* Press at 385 degrees F for 35-45 seconds using Medium pressure – 1 sided
* Press at 385 degrees F for 40-50 seconds using Medium pressure – 2 sides at a time
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface
– You can also try pressing the metal from the back side
These transfer instruction guidelines were created using a Swing-Away GeoKnight Press, size 20″ x 24″/508 x 609.6 mm with pressure of 60 PSI. They represent the best, most general instructions we can provide. Please remember that heat presses may vary. Check with your press manufacturer for any special concerns. This information may change as we make continual improvements and refine our processes. These instructions are guide lines only and are based on the inks, paper, and products we supply. Your inks, papers, etc. may require adjustments in your time/temp settings.