Image Creations Inc.

TEL: 800-260-2704 | Fax: 403-938-1016 | E-Mail: [email protected]

Your Image Transfer Specialists

Signage

Sign of Life Sign, Traditional

Item UNI5818  *  Unisub Hardboard Sign of Life Traditional, 11.5″ x 15.4″ x .25, (1/4″) White Gloss Sublimation Hardboard with plastic hang tag. This sign looks marvelous with your artsy additions.
Qty 8/case – Broken cases billed as each.
$16.41 ea less than case
$13.51 ea per case
$12.55 ea per 4+ cases

 

Sign of Life Sign, Antique

Item UNI5819  *  Unisub Signs of Life Sign, Antique, 10.9″ x 15.4″ x .25, (1/4″) White Gloss Sublimation Hardboard, 
with plastic hang tag. This sign looks fabulous with your modern ideas.
Qty 8/case – Broken cases billed as each.
$16.41 ea less than case
$13.51 ea per case
$12.55 ea per 4+ cases

 

Sign of Life Sign, Display Sign

Item UNI5820  *  Unisub™ Signs of Life Sign, Display Style,  15.5″ x 5.7″ x .25, (1/4″) White Gloss Sublimation Hardboard with plastic hang tag. This sign is excellent for an eye catching advertisement.
Qty 16/case – Broken cases billed as each.
$10.37 ea less than case
$8.54 ea per case
$7.93 ea per 4+ cases

 

EZ-Sign

Item UNI5557  *  EZ Sign – Black Edge  MDF – Size 2.18” x 8.18”
Qty 20/case – Broken cases billed as each.
$4.49 ea less than case
$4.18 ea per case
$4.11 ea per 4+ cases

 

EZ Sign

Item UNI5559  *  EZ Sign – Black Edge  MDF – Size 2.18” x 10.18”
Qty 16/case – Broken cases billed as each.
$4.52 ea less than case
$4.49 ea per case
$4.32 ea per 4+ cases

 

EZ SIGN

Item UNI5560  *  EZ Sign – Gold Edge  MDF – Size 2.18” x 10.18”
Qty 16/case – Broken cases billed as each.
$4.52 ea less than case
$4.49 ea per case
$4.32 ea per 4+ cases

 

* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image” 
* Place a sheet of plain white paper on the press.
* Remove the protective plastic covering from the product.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
* Cover imprintable with a sheet of plain white paper.
* Press at 385 degrees F for 80-90 seconds using Medium pressure
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface

* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image” 
* Place a sheet of plain white paper on the press.
* Remove the protective plastic covering from the product.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
* Cover imprintable with a sheet of plain white paper.
* Press at 385 degrees F for 70-80 seconds using Medium pressure
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface

These transfer instruction guidelines were created using a Swing-Away GeoKnight Press, size 20″ x 24″/508 x 609.6 mm with pressure of 60 PSI. They represent the best, most general instructions we can provide. Please remember that heat presses may vary.  Check with your press manufacturer for any special concerns.  This information may change as we make continual improvements and refine our processes.  These instructions are guide lines only and are based on the inks, paper, and products we supply.   Your inks, papers, etc. may require adjustments in your time/temp settings.  

Scroll to Top