Name Badges
Unisub opens the name badge market to a whole new world of color and excitement.
You’ll be able to offer your customers greater value in terms of quality and impact.
FRP Name Badges
Name Badge FRP
Item UNI5501 * Name Badge FRP Gloss Size 1”x 3”
Qty 250/case – Broken cases billed as each.
$1.04 ea less than case
$0.86 ea per case
$0.8 ea per 4+ cases
Name Badge FRP
Item UNI5515 * Name Badge FRP Matte Size 1”x 3”
Qty 250/case – Broken cases billed as each.
$1.04 ea less than case
$0.86 ea per case
$0.80 ea per 4+ cases
Name Badge FRP
Item UNI5502 * Name Badge FRP Gloss Size 1.25”x 3”
Qty 200/case – Broken cases billed as each.
$1.15 ea less than case
$0.95 ea per case
$0.88 ea per 4+ cases
Name Badge FRP
Item UNI5516 * Name Badge FRP Matte Size 1.25”x 3”
Qty 200/case – Broken cases billed as each.
$1.15 ea less than case
$0.95 ea per case
$0.88 ea per 4+ cases
Name Badge FRP
Item UNI5786 * Name Badge FRP Gloss Size 1.5”x 3”
Qty 150/case – Broken cases billed as each.
$1.40 ea less than case
$1.15 ea per case
$1.07 ea per 4+ cases
Name Badge FRP
Item UNI5530 * Name Badge FRP Gloss Size 2”x 3”
Qty 150/case – Broken cases billed as each.
$1.53 ea less than case
$1.26 ea per case
$1.17 ea per 4+ cases
Name Badge FRP
Item UNI5531 * Name Badge FRP Matte Size 2”x 3”
Qty 150/case – Broken cases billed as each.
$1.53 ea less than case
$1.26 ea per case
$1.17 ea per 4+ cases
Name Badge FRP
Item UNI5532 * Oval Name Badge FRP Gloss Size 1.5”x 3”
Qty 150/case – Broken cases billed as each.
$1.40 ea less than case
$1.15 ea per case
$1.07 ea per 4+ cases
Round Button FRP
Item UNI5665 * Round Button with Pin Size 2.5”
Qty 50/case – Broken cases billed as each.
$1.91 ea less than case
$1.57 ea per case
$1.46 ea per 4+ cases
Lapel Pin
Item UNI5666 * Lapel Pin Size 7/8” Round Qty
250/case – Broken cases billed as each.
$2.57 ea less than case
$2.12 ea per case
$1.97 ea per 4+ cases
Aluminum Name Badges
Name Badge Aluminum
Item UNI4461 * Name Badge White Gloss Aluminum Size 1.5”x 3” round corners
Qty 100/case – Broken cases billed as each.
$1.27 ea less than case
$1.04* ea per case
$0.97 ea per 4+ cases
Name Badge Aluminum
Item UNI4467 * Name Badge White Gloss Aluminum Size 2”x 3” round corners
Qty 150/case – Broken cases billed as each.
$1.71 ea less than case
$1.41 ea per case
$1.31 ea per 4+ cases
Name Badge Aluminum
Item UNI5950 * Name Badge Silver Aluminum Size 2”x 3”
Qty 150/case – Broken cases billed as each.
$1.81 ea less than case
$1.49 ea per case
$1.39 ea per 4+ cases
Name Badge Aluminum
Item UNI5733 * Name Badge White Gloss Aluminum Size 2”x 3.5” Round Corners
Qty 50/case – Broken cases billed as each.
$1.68 ea less than case
$1.38 ea per case
$1.28 ea per 4+ cases
Name Badge Aluminum
Item UNI5731 * Name Badge White Gloss Aluminum Size 2.5”x 3.5” square corners
Qty 50/case – Broken cases billed as each.
$1.15 ea less than case
$0.95 ea per case
$0.88 ea per 4+ cases
Magnetic Name Tag Backing
Item MLS * Magnetic Name Tag Backing Size 1/2” x 1 3/4”
Qty 100/case – Broken cases billed as each.
$1.70 ea less than case
$1.65 ea per case
$1.60 ea per 4+ cases
Plastic Name Tag Safety Pin
Item S-PIN * Plastic Name Tag Safety Pin with Peal & Stick Back
Qty 100/case – Broken cases billed as each.
$0.60 ea less than case
$0.50 ea per case
$0.47 ea per 4+ cases
* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image”
* Place a sheet of plain white paper on the press.
* If the product has a protective plastic covering remove it.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
* Cover imprintable with parchment or paper
* Press at 400 degrees F for 45-50 seconds using Medium pressure
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface
Note: These instructions are guide lines only and are based on the inks, paper, and products we supply. Your inks, papers, etc. may require adjustments in your time/temp settings.
* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image”
* Place a sheet of plain white paper on the press.
* If the product has a protective plastic covering remove it.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
* Cover imprintable with parchment or paper
* Press at 400 degrees F for 60-65 seconds using Medium pressure
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface
Note: These instructions are guide lines only and are based on the inks, paper, and products we supply. Your inks, papers, etc. may require adjustments in your time/temp settings.