Sublimation Trophy Disks
Trophy Disk
Item UNI5729 * Trophy Disk aluminum, white
Size 1” round
Qty 100/case – Broken cases billed as each$1.04 → $0.83 ea less than case$0.88 → $0.70 ea per case qty
Trophy Disk
Item UNI5572 * Trophy Disk aluminum, white
Size 2” round Qty 100/case – Broken cases billed as each$1.57 → $1.25 ea less than case$1.32 → $1.05 ea per case qty
Trophy Disk
Item UNI4425 * Trophy Gloss Gold Disk aluminum
Size 1” round x .030”
Qty 100/case – Broken cases billed as each$0.90 → $0.67 ea less than case$0.74 → $0.55 ea per case qty
Trophy Disk
Item UNI4421 * Trophy Gloss Gold Disk aluminum
Size 2” round x .030”
Qty 100/case – Broken cases billed as each$1.36 → $1.02 ea less than case$1.12 → $0.84 ea per case qty
* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image”
* Place a sheet of plain white paper on the press.
* If the product has a protective plastic covering remove it.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
* Cover imprintable with parchment or paper
* Press at 385 degrees F for 30-40 seconds using Medium pressure
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface
– You can also try pressing the metal from the back side
Note: These instructions are guide lines only and are based on the inks, paper, and products we supply. Your inks, papers, etc. may require adjustments in your time/temp settings.