Sublimation Key Chains


Round Flexi Soft PU Leather Key Chain
Item SKFL-RND * Round Flexi Soft PU Leather Key Chain Size 2”: Stylish key ring sublimatable 2 – sides.
Qty 25/case – Broken cases billed as each.
$2.95 ea less than case qty
$2.45 ea per case qty
$2.30 ea per 4+ case qty


Rectangle Flexie Soft PU Leather Key Chain
Item SKFL-REC * Rectangle Flexi Soft PU Leather Key Chain Size 1.5”x 3″: Stylish key ring sublimatable 2 – sides.
Qty 25/case – Broken cases billed as each.
$2.95 ea less than case qty
$2.45 ea per case qty
$2.30 ea per 4+ case qty

Heart Key Chain - FRP
Item UNI5520 * FRP Heart Key Chain (2 side) Unisub FRP Key tags are two sided 3/32” thick, with a hole for hardware. Each includes snap-on key chain hardware – Size 2.5”
Qty 50/case – Broken cases billed as each.
$2.58 ea less than case qty
$2.18 ea per case qty
$2.01 ea per 4+ case qty

Round Key Chain - FRP
Item UNI5521 * FRP Round Key Chain (2 side) Unisub FRP Key tags are two sided 3/32” thick, with a hole for hardware. Each includes snap-on key chain hardware – Size 2.5”
Qty 50/case – Broken cases billed as each.
$2.58 ea less than case qty
$2.18 ea per case qty
$2.01 ea per 4+ case qty


Square Key Chain - FRP
Item UNI5524 * FRP Square Key Chain (2 side) Unisub FRP Key tags are two sided 3/32” thick, with a hole for hardware. Each includes snap-on key chain hardware – Size 2.5”
Qty 50/case – Broken cases billed as each.
$2.58 ea less than case qty
$2.18 ea per case qty
$2.01 ea per 4+ case qty

Rectangle Key Chain - FRP
Item UNI5525 * FRP Rectangle Key Chain (2 side) Unisub FRP Key tags are two sided 3/32” thick, with a hole for hardware. Each includes snap-on key chain hardware – Size 1.25” x3″
Qty 50/case – Broken cases billed as each.
$2.58 ea less than case qty
$2.18 ea per case qty
$2.01 ea per 4+ case qty

Rectangle Key Chain - Aluminum
Item UNI5995 * Rectangle Key Chain (2 side) Unisub Aluminum Key tags are two sided, with a hole for hardware. Each includes snap-on key chain hardware. Size 1.6”x 2.25”
Qty 50/case – Broken cases billed as each.
$3.07 ea less than case qty
$2.59 ea per case qty
$2.40 ea per 4+ case qty

Oval Key Chain - Aluminum
Item UNI5917 * Oval Key Chain (2 side) Unisub Aluminum Key tags are two sided, with a hole for hardware. Each includes snap-on key chain hardware. Size 1.375”x 2.75”
Qty 50/case – Broken cases billed as each.
$3.07 ea less than case qty
$2.59 ea per case qty
$2.40 ea per 4+ case qty


Rectangle Shaped Metal Key Chain
Item SKR-REC * Rectangle Shaped Key ring – Metal – Stylish polished metal key ring with sublimatable aluminum insert. size: 1 3/8” Pendant size: 1 3/4” x 1 1/8” Insert size: 1 1/8” x 1 3/4″
Qty 20/case – Broken cases billed as each.
$3.35 ea less than case qty
$2.95 ea per case qty
$2.85 ea per 4+ case qty


Rounded Rectangle Shaped Metal Key Chain
Item SKR-RREC * Rounded Rectangle Shaped Key ring – Metal – Stylish polished metal key ring with sublimatable aluminum insert. size: 1 3/8” Pendant size: 1” x 2” Insert size: 1 1/2″ x 13/16″
Qty 20/case – Broken cases billed as each.
$3.35 ea less than case qty
$2.95 ea per case qty
$2.85 ea per 4+ case qty
* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image”
* Place a sheet of plain white paper on the press.
* If the product has a protective plastic covering remove it.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
* Cover imprintable with parchment or paper
* Single Sided – Press at 385 degrees F for 40-50 seconds using Medium pressure
* Double Sided – Press at 388 degrees F for 40-50 seconds using Medium pressure – 1 side at a time
* Double Sided – Press at 385 degrees F for 60-70 seconds using Medium pressure – 2 sides at a time
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface
* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image”
* Place a sheet of plain white paper on the press.
* If the product has a protective plastic covering remove it.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
* Cover imprintable with parchment or paper
* Double Sided – Press at 385 degrees F for 60-70 seconds using Medium pressure – 1 side at a time
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface
* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image”
* Place a sheet of plain white paper on the press.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Press at 320 degrees F for 80 seconds using Medium pressure
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface
These transfer instruction guidelines were created using a Swing-Away GeoKnight Press, size 20″ x 24″/508 x 609.6 mm with pressure of 60 PSI. They represent the best, most general instructions we can provide. Please remember that heat presses may vary. Check with your press manufacturer for any special concerns. This information may change as we make continual improvements and refine our processes. These instructions are guide lines only and are based on the inks, paper, and products we supply. Your inks, papers, etc. may require adjustments in your time/temp settings.