Image Creations Inc.

TEL: 800-260-2704 | Fax: 403-938-1016 | E-Mail: [email protected]

Your Image Transfer Specialists

License Plates and Frames

License Plates and Frames Show your school spirit…boost your favorite team… or just create personalized license plates.

License Plate (Aluminum White)

Item UNI5656  *  License Plate (Aluminum White) :  Size 11.812” x 5.875”
Qty 50/case – Broken cases billed as each.
$8.52 ea less than case
$7.28 ea per case  
$6.93 ea per 4+ cases

 

License Plate (Aluminum Silver) 

Item UNI5948  *  License Plate (Aluminum Silver) :  Size 11.812” x 5.875”
Qty 50/case – Broken cases billed as each.
$9.04 ea less than case
$7.71 ea per case 
$7.35 ea per 4+ cases 

 

License Plate (Aluminum Gold) 

Item UNI4420  *  License Plate (Aluminum Gold) :  Size 11.875” x 5.875”
Qty 50/case – Broken cases billed as each.
$7.09 ea less than case
$6.36 ea per case 
$6.27 ea per 4+ cases 

 

License Plate Frame (Aluminum White) 

Item UNI4566  * License Plate Frame, Unisub® White Gloss Sublimation Aluminum,  Size 6.5″ x 12.25″ x .030″. Full size license plate frame with 4.16″ viewing area
Qty 50/case – Broken cases billed as each.
$8.29 ea less than case
$7.07 ea per case 
$6.74 ea per 4+ cases  

License Plate Frame (frp) 

Item UNI5928  *  License Plate Frame (frp) :  Size 12.125” x 6.25”
Qty 50/case – Broken cases billed as each.
$5.32 ea less than case
$4.96 ea per case 
$4.70 ea per 4+ cases 

 

License Plate Frame (frp) for Motorcycle

Item UNI5657  *  License Plate Frame (frp) for Motorcycle:  Size 5” x 7”
Qty 50/case – Broken cases billed as each.
$3.22 ea less than case
$2.85 ea per case 
$2.73 ea per 4+ cases

 
 

* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image” 
* Place a sheet of plain white paper on the press.
* If the product has a protective plastic covering remove it.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
* Cover imprintable with parchment or paper 
* Press at 400 degrees F for 70-75 seconds using Medium pressure  
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface

Note: These instructions are guide lines only and are based on the inks, paper, and products we supply.   Your inks, papers, etc. may require adjustments in your time/temp settings.

* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image” 
* Place a sheet of plain white paper on the press.
* If the product has a protective plastic covering remove it.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
* Cover imprintable with parchment or paper 
* License Plate Frames – Press at 400 degrees F for  60-65 seconds using Medium pressure
* Mini License Plates – Press at 400 degrees F for 50-60 seconds using Medium pressure
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface

Note: These instructions are guide lines only and are based on the inks, paper, and products we supply.   Your inks, papers, etc. may require adjustments in your time/temp settings.

Scroll to Top