Trophy Disks
Trophy Disk
Item UNI5729 * Trophy Disk aluminum, white
Size 1” round
Qty 100/case – Broken cases billed as each
$0.88 ea less than case
$0.72 ea per case
$0.67 ea 4+ cases
Item UNI5572 * Trophy Disk aluminum, white
Size 2” round Qty 100/case – Broken cases billed as each
$1.32 ea less than case
$1.09 ea per case
$1.01 ea 4+ cases
Trophy Disk
Item UNI4425 * Trophy Gloss Gold Disk aluminum
Size 1” round x .030”
Qty 100/case – Broken cases billed as each
$0.83 ea less than case
$0.68 ea per case
$0.64 ea 4+ cases
Trophy Disk
Item UNI4421 * Trophy Gloss Gold Disk aluminum
Size 2” round x .030”
Qty 100/case – Broken cases billed as each
$1.26 ea less than case
$1.04 ea per case
$0.96 ea 4+ cases
* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image”
* Place a sheet of plain white paper on the press.
* If the product has a protective plastic covering remove it.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
* Cover imprintable with parchment or paper
* Press at 400 degrees F for 45-50 seconds using Medium pressure
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface
– You can also try pressing the metal from the back side
Note: These instructions are guide lines only and are based on the inks, paper, and products we supply. Your inks, papers, etc. may require adjustments in your time/temp settings.