Image Creations Inc.

TEL: 800-260-2704 | Fax: 403-938-1016 | E-Mail: [email protected]

Your Image Transfer Specialists

Coasters

Coasters – Protect furniture and complement home décor with our imprintable coasters.
Excellent for displaying business logos, artwork or your favorite photos

Hardboard Coaster

Item UNI1009  *  Hardboard Coaster  Size 4” x 4”
Qty 40/case – Broken cases billed as each.
$1.54 ea less than case
$1.27 ea per case
$1.18 ea per 4+ cases

 

Hardboard Coaster with Cork Bottom

Item UNI5677  *  Hardboard Coaster with cork bottom    Size 3.75” x 3.75”
Qty 40/case – Broken cases billed as each.
$2.02 ea less than case
$1.67 ea per case
$1.55 ea per 4+ cases

Hardboard Coaster with Cork Bottom

Item UNI5822  *  Hardboard Heart Coaster   Size 3.8” x 4”
Qty 40/case – Broken cases billed as each.
$2.27 ea less than case
$1.87 ea per case
$1.74 ea per 4+ cases

 

Hardboard Heart Coaster with Cork Bottom

Item UNI4015  *  Hardboard Heart Coaster   Size 3.8” x 4”
Qty 40/case – Broken cases billed as each.
$2.32 ea less than case
$1.91 ea per case
$1.78 ea per 4+ cases

 

Hardboard Coaster natural finish

Item SCOAST  *  Hardboard Coaster  with natural finish. Size 3.75” x 3.75”  Natural wood one side pritnable.
Qty 40/case – Broken cases billed as each.
$2.02 ea less than case
$1.67 ea per case
$1.55 ea per 4+ cases

 

Porcelain Open Wreath Coaster

Item SO-RNDW4  *  Porcelain Open Wreath Coaster with Heart Lace Trim  4″ diameter 1-Sided, Gloss 
Qty 100/case – Broken cases billed as each.
$2.55 ea less than case
$2.35 ea per case
$2.20 ea per 4+ cases

 

Coaster Puzzle

Item UNI5795  *  These puzzles sit on the table on display then break apart to be used as coaster.   MDF Coaster   Size 7.625” x 7.625” x 0.125”
Qty 10/case – Broken cases billed as each.
$9.97 ea less than case
$8.21 ea per case
$7.62 ea per 4+ cases

 

Coaster Holder

Item UNI5701  *  Slotted Mahogany Coaster Holder – Holds 4 coasters.   Size 3” x 3”
Qty 10/case – Broken cases billed as each.
$3.81 ea less than case
$3.13 ea per case
$2.91 ea per 4+ cases

 

Unisub Production Jig

Item UNI5935  * Unisub® Production Jig, 13″ x 19″, MDF (Medium Density Fiberboard) Sublimation, for U5677, Prints 8. This jig is for imprinting cork backed round cornered coasters. Reduce pressing time, eliminate tape and save on transfer paper with jigs.
$56.37 ea 

 

* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image” 
* Place a sheet of plain white paper on the press.
* If the product has a protective plastic covering remove it.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
* Cover imprintable with parchment or paper 
* Press at 400 degrees F for 60-65 seconds using Medium pressure
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface

Note: These instructions are guide lines only and are based on the inks, paper, and products we supply.   Your inks, papers, etc. may require adjustments in your time/temp settings.

* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image” 
* Place a sheet of plain white paper on the press.
* If the product has a protective plastic covering remove it.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
* Cover imprintable with parchment or paper 
* Press at 400 degrees F for  60-65 seconds using Medium pressure
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface

Note: These instructions are guide lines only and are based on the inks, paper, and products we supply.   Your inks, papers, etc. may require adjustments in your time/temp setting60

* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image” 
* Place a sheet of plain white paper on the press.
* If the product has a protective plastic covering remove it.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
* Cover imprintable with parchment or paper 
* Press at 400 degrees F for 75-80 seconds using Medium pressure
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface

Note: These instructions are guide lines only and are based on the inks, paper, and products we supply.   Your inks, papers, etc. may require adjustments in your time/temp settings.

* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image” 
* Place a sheet of plain white paper on the press.
* If the product has a protective plastic covering remove it.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
* Cover imprintable with parchment or paper 
* Press at 400 degrees F for 80-85 seconds using Medium pressure
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface

Note: These instructions are guide lines only and are based on the inks, paper, and products we supply.   Your inks, papers, etc. may require adjustments in your time/temp settings.

* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image” 
* Place a rubber or felt pad on the press.
* Place the transfer image side up on the rubber or felt pad.
* Place the coaster facing down onto the transfer paper
* Place a sheet of plain white paper on top
* Press at 400 degrees F for 5-6 minutes using Light pressure
* When pressing is finished carefully remove and allow to cool on a clean surface

Note: These instructions are guide lines only and are based on the inks, paper, and products we supply. Your inks, papers, etc. may require adjustments in your time/temp settings.

* Prepare artwork and size transfer according to the size and shape of the product.
* Do NOT reverse or “mirror image” 
* Place a neomex felt pad on the bottom platform of the press
* Pre-heat the product for 10-15 seconds
* Using heat resistant tape, secure the image to the frosted side of the product
* Lay the product face up on the heat press so that you are pressing “through” the product. (the artwork is between the product and the nomex pad)
* Cover product with a sheet of plain white paper.
* Press at 400 degrees F for 4-5 minutes using Medium pressure.
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface

Note: These instructions are guide lines only and are based on the inks, paper, and products we supply. Your inks, papers, etc. may require adjustments in your time/temp settings.

Scroll to Top