Sublimation Lap Top Sleeves
Netbook / iPad Sleeve
Item S-NBC-12 * Netbook / iPad Sleeve- Protect your computer with this Neoprene Sleeve, 9.25″ x 12.5″, Image 1-side; black on other. High-Quality Neoprene (Wetsuit Material) with Zippered Closure.
Qty 10/case – Broken cases billed as each.$10.50 → $6.82 ea less than case$10.29 → $6.68 ea per case qty
Prepare your artwork in the normal way, taking into consideration the size of the imprintable sleeve. Mirror the image to ensure it will be right-reading once it’s printed. Most printers refer to this as “Flip Horizontal” or “Mirror”
In order to transfer the Image
•Place the sleeve face-down against the transfer, and secure it using heat resistant tape|
•Carefully flip over and place the laptop sleeve on the heat press with the transfer on top.
•Be sure that the zipper is hanging off the edge and does not come in contact with the heat press.
•Insert cardboard inside the sleeve. This is necessary to avoid imprinting being affected by the bulk of the inner seam. Be sure to insert cardboard between printable side of sleeve and inner seam.
•Press at 400° F for 45 seconds using Firm pressure.
•Remove transfer while hot.
Note: These instructions, including transfer times and temperatures, are based on the inks, paper, ovens and products we use. Your inks, papers, etc. may require adjustments in your time/temp settings.