Item S-LANYARD * Lanyard Size 34” x 3/4” wide. Tough super-strength flat woven lanyard, polyester including metal hook and solid strap with plastic break-away connector
Qty 50/case – Broken cases billed as each.
$2.95 ea less than case
$2.70 ea per case
$2.55 ea per 4+ cases
* Prepare artwork and size transfer according to placement size of the imprintable.
* Image must be produced in reverse or “mirror image” to insure correct application
* Preheat press to 385 degrees F
* Prepress the imprintable for 5-10 seconds to get rid of any moisture
* Using heat resistant tape, secure the image to the object to keep it from moving
* Press at 385 degrees F for 45-60 seconds using Medium-Firm pressure
* Remove transfer while hot being careful not to let the paper shift across the surface of the object, as a “ghost:”image may appear.
* Let cool
Note: These instructions are guide lines only and are based on the inks, paper, and products we supply. Your inks, papers, etc. may require adjustments in your time/temp settings.