Sublimation iPad Covers
iPad Soft Cover
Item S-iPad-S * Be unique and personalize your iPad with its own durable protective cover. Made from canvas and leather with sublimatable area. Easy access to all controls – scratch and shock resistant. Size 8” x 10”
Qty 36/case – Broken cases billed as each$29.95 ea less than case$28.70 ea per case$28.20 ea per 4+ cases
Bargain Price $14.98 ea
· Initially prepare the artwork and size the transfer to the size of the imaging area.
· Be sure to “mirror” the image for correct reading.
· Remove any lint or residue which may be on the imaging area.
· Extra care is required when pressing these products. Insure that the leather parts of the flap are covered with heat tape, silicone paper or a Teflon sheet. The parts that are not being printed on should not be in direct contact with the platen of the heat press.
· Prepress for 10 seconds at 390ºF (198°C).
· Lay a protective piece of paper on the bottom of the press.
· Using heat resistant tape, fasten the transfer to imaging area, image side down.
· Place the cover on the heat press with transfer on top.
· Cover with a sheet of protective paper.
· Press at 390ºF (198°C) for 40 seconds with medium to high pressure
· Remove transfer while hot.