Sublimation CD / DVD Cases
CD / DVD Case - Plastic
Item SCD-P * CD / DVD Case – Plastic: Store your favorite tunes or shows in this unique plastic personalized case. Also great for digital image storage such as weddings and other special occasions. Capacity is 12 discs Size 5.75” round – metal disk size 3.94”
Qty 24/case – Broken cases billed as each.
$7.40 ea less than case
$6.70 ea per case
$6.20 ea per 4+ cases
CD / DVD Case - Aluminum
Item SCD-A * CD / DVD Case – Aluminum: Store your favorite tunes or shows in this unique aluminum personalized case. Also great for digital image storage such as weddings and other special occasions. Capacity is 6 disks. Size 5.88” x 5.38 – metal disk size 3.94”
Qty 24/case – Broken cases billed as each.
$7.40 ea less than case
$6.70 ea per case
$6.20 ea per 4+ cases
CD / DVD Case - Wood
Item UNI5807 * CD / DVD Case – Wood: Store your favorite tunes or show in this unique wooden personalized case. Also great for digital image storage such as weddings and other special occasions. Size 5.5” round x 1.87 – metal disk size 4.5”
Qty 12/case – Broken cases billed as each.
$21.27 ea qty 1 to 11
$19.77 ea per case qty
$19.47 ea per 4+ case qty
Replacement Aluminum Insert for UNI5807
Item UNI5809 * Replacement Aluminum Insert for UNI5807. Size 4.5: round
Qty 12/case – Broken cases billed as each.
$2.01 ea qty 1 to 11
$1.87 ea per case qty
$1.84 ea per 4+ case qty
* Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image”
* Place a sheet of plain white paper on the press.
* If the product has a protective plastic covering remove it.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
* Cover imprintable with parchment or paper
* Press at 400 degrees F for 60-70 seconds using Medium pressure
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface
– You can also try pressing the metal from the back side
Note: These instructions are guide lines only and are based on the inks, paper, and products we supply. Your inks, papers, etc. may require adjustments in your time/temp settings.